Have you noticed your Bissell vacuum losing suction or making strange noises? It might be time to change the vacuum belt. This simple task can restore your vacuum’s performance and extend its life, saving you time and money on repairs or replacements.
Key Takeaways
- Identify Signs of Belt Wear: Look for decreased suction and unusual noises as indicators that your Bissell vacuum belt needs replacement.
- Gather Essential Tools: Ensure you have a Phillips screwdriver, replacement belt, scissors, soft cloth, and your vacuum manual before starting the belt change.
- Follow Safety Procedures: Always unplug the vacuum before disassembling it to avoid accidental startup and potential injury.
- Carefully Remove and Install: Detach the old belt by removing the brush roll and reassemble with the new belt, ensuring proper alignment and tension for optimal performance.
- Test Vacuum Functionality: After installation, check for unusual sounds, effective suction, and smooth brush roller operation to ensure the vacuum operates correctly.
- Monitor Performance: Evaluate the vacuum’s performance over time to confirm the belt installation was successful and the vacuum is functioning efficiently.
Tools Needed
Changing the Bissell vacuum belt requires a few essential tools. Gather these items before starting the process to ensure a smooth experience:
- Screwdriver: A Phillips head screwdriver helps remove screws from the vacuum’s housing.
- Replacement Belt: Purchase a compatible bissell vacuum belt specific to your model.
- Scissors: Scissors assist in trimming any worn-out belt sections for easier removal.
- Soft Cloth: A soft cloth wipes down any dust or debris from the vacuum’s interior during the process.
- Vacuum Cleaner Manual: Refer to your vacuum’s manual for specific instructions related to your model.
Make sure you have these tools ready to make the belt-changing process efficient and straightforward.
Recommended Products
PERFECT UNIVERSAL COMPATIBILITY：These 3031120 belt Compatibility With Perfectly fits Bissell style 7/9/10/12/14/16，Suitable for most Bissell vacuum cleaner models series ：2252, 2254,1793,1792,2259,22543,2256 ,82H1, 2191U,2191,2260,21K3,22C1, 3522, 3545, 35451, 35455, 3590, 35931, 3574, 3575, 3576, 3590,3591,3593, 3910,3920, 3594, 3990, 4104, 44M3, 46E5, 6390W, 6579, 6582, 6583, 6584,6585, 8975,6590,6594, 6596, 71Y7, 82G7, 92L3P, 92L3,1797,1331,1831,1825, 2258,2487 ,2488, 2490,82H1,1739 ,2019, 68C7,98N4 ,2491, 2492, 2739, 2190,1240,1700,2692 etc
Complete Brush Roll & Belt Replacement Kit (#3031120) Restore strong cleaning performance with this complete replacement kit. Includes a high-quality brush roll and a multipurpose cleaning brush—designed to bring your vacuum back to peak efficiency.
Broad Compatibility - These Belts are compatible with Bissell Cleanview Bagless Vacuum Cleaner Models 1319,1319A,1320,13202,1320A,1322,1328,1328V,1329,1330,13302,1330R,1331,1332,1332R,1333,1334,1327,1819,1820,1813,1822,1823,1824,1825,18252,1825R,1830,1831,1831K,1831R,1834,1836,1837,1838,2410,24101,2412,9595A,2486,2487,2488,2489,2490,2491,2492, 2494,7482,3918,3918C and CleanView with OnePass Technology 3583,35831,35835,3583R,9595,9595A,95953,95954,95956,95957,9595R Series.
Preparing the Vacuum
Preparing your Bissell vacuum properly before changing the belt is essential for a smooth process. Follow these steps to ensure safety and efficiency.
Unplugging the Device
Unplugging the vacuum cleaner is the first step. Ensure the vacuum is completely disconnected from the power source. This action prevents any accidental startup during the belt replacement process, keeping you safe.
Locating the Belt Access Door
Locating the belt access door is essential for reaching the belt. Most Bissell models have an access door on the underside or back of the unit. Check your vacuum cleaner manual for the exact location. Use a screwdriver to remove any screws securing the access door. With the door removed, you’ll see the belt, making the next steps easier.
Removing the Old Belt
To change the Bissell vacuum belt, you first need to remove the old one. This process involves disassembling parts of the vacuum and carefully detaching the worn belt.
Recommended Products
Complete Replacement Kit Restore your vacuum’s original cleaning power with this complete brush roll and belt kit. Includes 1× brush roller and 1–2× drive belts and 1× multipurpose cleaning brush.to replace worn parts and improve vacuum efficiency.
Complete Brush Roller Replacement Kit - The complete replacement kit helps you to make a perfect parts replacement for Bissell vacuum cleaner, making your vacuum cleaner work as efficiently as it did in the first place.
Complete Brush Roll & 2 Belts Replacement Kit (#3031120) Restore strong cleaning performance with this complete replacement kit. Includes a high-quality brush roll and a multipurpose cleaning brush—designed to bring your vacuum back to peak efficiency.
Disassembling the Vacuum Cleaner
- Unplug the Vacuum: Always start by unplugging the vacuum to ensure safety.
- Remove the Bottom Plate: Use a screwdriver to remove the screws on the bottom plate. Keep screws in a safe place to avoid losing them.
- Take Off the Brush Roll: Slide the brush roll out after removing the bottom plate. Generally, this may involve lifting or rotating the roll slightly.
- Access the Belt Area: Locate the belt area after removing the brush roll. This section usually features the old belt that needs replacing.
- Identify the Old Belt: Check the currently installed belt. Look for signs of wear, such as fraying or stretching.
- Detach the Old Belt: Carefully slide the old belt off the motor shaft and the brush roll. Pulling gently should release it without any effort.
- Inspect for Debris: Before installing the new belt, clean the area of any dust or hair that may hinder the new belt‘s performance.
- Check Components: Verify that all components, including the motor and brush roll, are in working order before proceeding.
After completing these steps, you are prepared to install the new belt for optimal vacuum performance.
Installing the New Belt
After removing the old belt, you’re ready to install the new one. Follow these steps to ensure proper installation.
Recommended Products
Compatible Model: This replacement is compatible with Bissell Cleanview Swivel Pet crosswave 252 2489 22543 24899 1327 1333 1819, 1819R, 1824, 1820, 2383, 1825, 1813, 1823, 18252, 1825R, 1836, 1838, 2256, 2254, 22543, 22548, 2255, 2739, 2256K, 2258, 22582, 2259, 1830, 2260, 2253, 22547, 22549, 2316, 2252, 2488, 2486, 2487, 2492, 2490, 2489, 24899, 2491, 2494, 2254 replacement part number 1604545, 1611230. If you are not sure about the model, please contact customer service before purchasing
Compatibility: Grooved belt for Triple Action Brush Roll, compatible with MultiClean Pet Vacuum Cleaner 2999, 2849, 3000, 3057, 28492; MultiClean Pet Slim Vacuum Cleaner 31269 3126, 31268; MultiClean Lift-Off Pet Slim Vacuum Cleaner 31259 3125, 31258, 3307; MultiClean Lift-Off Pet Vacuum Cleaner 2852 2998, 28524, 2920, 3059, 3399.
Broad Compatibility - These Flat Pump Belts are compatible with Bissell PowerForce PowerBrush Pet2910, 2910W and TurboClean PowerBrush Lightweight Pet 2987, 29878, 29879, 2806, 28062, 28068 Carpet Cleaner.
Aligning the New Belt
- Position the new belt around the motor shaft. Make sure it sits securely in the designated groove.
- Fit the belt around the brush roll. Align it so that it runs parallel to the other components.
- Check the tension. The belt should be snug but not overly tight, allowing smooth movement without strain.
- Reinsert the brush roll. Ensure it’s seated properly in its housing.
- Secure any clips or screws removed during disassembly. This will keep all parts in place during operation.
- Attach the vacuum cover. Align it with the main body and press down until it clicks into place.
- Double-check all connections. Make sure everything is tightly assembled before testing the vacuum.
Following these steps ensures your Bissell vacuum operates effectively with the new belt installed.
Testing the Vacuum
After installing the new belt, it’s crucial to test your Bissell vacuum for proper functionality. Follow these steps to ensure everything works as it should:
- Plug In the Vacuum: Start by connecting your vacuum to a power source. Ensure the plug fits securely into the outlet.
- Power On: Switch on the vacuum. Check that the power indicator light turns on.
- Listen for Sounds: Pay attention to any unusual noises. A well-functioning vacuum should operate quietly without grinding or squeaking sounds.
- Check Suction: Test the suction by placing the vacuum on a carpeted surface. Move the vacuum back and forth to see if it picks up dirt and debris efficiently. If it struggles, the belt may not be properly aligned.
- Inspect Brush Roll: Look at the brush roll while the vacuum runs. It should rotate smoothly without obstruction. If it stops or hesitates, check that the belt tension is correct.
- Test Different Surfaces: Try your vacuum on various surfaces, such as hardwood floors and rugs. This helps confirm it adheres to different textures without losing suction power.
- Monitor for Overheating: Observe for signs of overheating during operation. If the vacuum feels hot to the touch, turn it off immediately. This might indicate an issue with the belt installation.
- Evaluate Performance Over Time: Run the vacuum for a more extended period. This helps ensure consistent performance without sudden drops in suction or other issues.
If all tests pass, your Bissell vacuum is ready to tackle cleaning tasks effectively. If problems persist, revisit the installation steps to ensure everything is in place correctly.
Conclusion
Changing your Bissell vacuum belt can breathe new life into your cleaning routine. By following the steps outlined and testing your vacuum afterward you can ensure it runs smoothly and efficiently. Remember to keep an eye on its performance over time. If any issues arise don’t hesitate to revisit the installation process. With a little care your vacuum will be ready to tackle dirt and debris like new. Happy cleaning!
Frequently Asked Questions
What are the signs that my Bissell vacuum needs a new belt?
If your Bissell vacuum isn’t picking up dirt properly, makes unusual sounds, or the brush roll isn’t spinning, these may be signs that the belt needs to be replaced. Additionally, if the vacuum feels less powerful or has reduced suction, it’s time to check the belt.
How do I change the belt on my Bissell vacuum?
To change the belt, first, unplug the vacuum. Remove the cover and the old belt. Inspect for any debris, then install the new belt ensuring it fits correctly on the motor and brush roll. Finally, reattach the cover and plug the vacuum back in.
How do I test my vacuum after changing the belt?
After changing the belt, check the vacuum’s power by turning it on. Listen for any unusual sounds and test the suction on different surfaces. Monitor the performance over time to ensure it operates effectively.
What should I do if my vacuum still isn’t working after replacing the belt?
If your vacuum still has issues after replacing the belt, revisit the installation steps. Ensure the belt is properly installed and not damaged. Check for other blockages or mechanical problems that could affect performance.
